Máy đo tụ điện Hioki 3504-50

Measurement parameters

C (capacitance), D (loss coefficient tan δ)

Measurement range

C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99000

Basic accuracy

(Typ.) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016

Measurement frequency

120 Hz, 1 kHz

Measurement signal level

100 mV (3504-60 only), 500 mV, 1 V rms
CV 100 mV Measurement range: up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz)
CV 500 mV Measurement range : up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz)
CV 1V Measurement range : up to 70 μF range (Source frequency 1 kHz), up to 700 μF range (Source frequency 120 Hz)

Output impedance

5Ω (In open terminal voltage mode outside of the CV measurement range)

Display

LED (six digits, full scale count depends on measurement range)

Measurement time

2 ms (Typ. value. Depends on measurement configuration settings)

Functions

4-terminal contact check function (3504-60 only)
BIN (measurement values can be classified by rank) (3504-50, 3504-60), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, EXT. I/O, RS-232C (all models standard), GP-IB (3504-50, 3504-60)

Power supply

Selectable 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz, 110 VA max.

Dimensions and mass

260 mm (10.24 in) W × 100 mm (3.94 in) H × 220 mm (8.66 in) D, 3.8 kg(134.0 oz)

Accessories

Power cord ×1, Instruction manual ×1, Spare fuse ×1