Thiết bị kiểm tra nội trở ắc quy Hioki BT3562

Max. applied measurement voltage

± 60 VDC rated input voltage
± 70 VDC Max. rated voltage to earth

Resistance measurement ranges

3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 mΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges
Accuracy: 30 mΩ to 3000 Ω ranges, ± 0.5% rdg. ± 5 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
3 mΩ range, ± 0.5% rdg. ± 10 dgt. (Add ± 30 dgt. for EX.FAST, or ± 10 dgt. for FAST, or ± 5 dgt. for MEDIUM) 
Testing source frequency: 1 kHz ± 0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 mA (3000 Ω range)
Open-circuit Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3000 Ω ranges)

Voltage measurement ranges

6 VDC (resolution 10 mV) to 60 VDC (resolution 100 mV), 2 ranges

Accuracy: ± 0.01% rdg. ± 3 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)

Display

31000 full digits (resistance), 600000 full digits (voltage), LED

Sampling rate

Four steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow) 
(Typ., sampling time depends on supply frequency settings and function.)

Measurement time

Response time + sampling rate, approx. 10 ms for measurements
(Response time depends on reference values and the measurement object.)

Comparator functions

Judgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.)

Analog output

Measured resistance (displayed value, from 0 to 3.1 V DC, -01 suffix models only)

Interfaces

External I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only)

Power supply

100 to 240 VAC, 50/60 Hz, 30 VA max.

Dimensions and mass

215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)

Accessories

Instruction manual ×1, Power cord ×1