Ampe kìm AC/DC Amprobe AMP-330 ( AC:0-600A,DC:0 - 1000A )

Đắc điểm của Ampe kìm Amprobe AMP-330

 

 

The Amprobe AMP-330 True-RMS Clamp meter offers a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, the AMP330 clamp meter is the best clamp meter for the job.

The AMP-330 is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw.

 

 

HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. The AMP330 also has core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC/DC current, AC/DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.

 

 

FEATURE		AMP-210	AMP-220	AMP-310	AMP-320	AMP-330
AC voltage (True-rms)	Range:	0 to 600.0 V				0 to 1000.0 V
	Accuracy:	±1.0% + 5LSD (50 to 60 Hz)				±0.8% + 5LSD (50 to 60 Hz)
DC voltage	Range:	0 to 600.0 V
	Accuracy:	±1.0% + 5LSD
AC+DC voltage	Range:	–	0 to 600.0 V	–	0 to 600.0 V	0 to 1000.0 V
	Accuracy:	–	±1.2% + 7LSD (50 to 60 Hz)	–	±1.2% + 7LSD (50 to 60 Hz)	±1.0% + 7LSD (50 to 60 Hz)  ±1.8% + 7LSD (DC 40 to 200 Hz)  ±1.2% + 7LSD 200 to 400 Hz)
AC current	Range:	0 to 600.0 A
	Accuracy:	±1.8% + 5LSD (50 to 60 Hz)  ±2.0% + 5LSD (100 to 400 Hz)
DC current	Range:	–	0 to 600.0 A	–	0 to 600.0 A	0 to 1000.0 A
	Accuracy:	–	±2.0% + 5LSD (DC 50 to 100 Hz)	–	±2.0% + 5LSD (DC 50 to 100 Hz)	±1.8% + 5LSD (DC 50 to 100 Hz)
AC+DC current	Range:	–	0 to 600.0 A	–	0 to 600.0 A	0 to 1000.0 A
	Accuracy:	–	±2.2% + 7LSD (DC 50 to 100 Hz)  ±2.7% + 7LSD (100 to 400 Hz)	–	±2.2% + 7LSD (DC 50 to 100 Hz)  ±2.7% + 7LSD (100 to 400 Hz)	±2.2% + 7LSD (40 to 100 Hz)  ±2.5% + 7LSD (100 to 400 Hz)
Precise low current AC	Range:	0 to 60.00 A
	Accuracy:	±1.5% + 5LSD (50 to 60 Hz)				±1.5% + 5LSD (50 to 60 Hz)  ±2.0% + 5LSD (0.00 to 20.00 A, 100 to 400 Hz)  ±3.0% + 5LSD (>20.00 to 60.00 A, 40 to 100 Hz)  ±3.0% + 5LSD (>20.00 to 60.00 A, 100 to 100 Hz)
Precise low current DC	Range:	–	0 to 60.0 A	–	0 to 60.0 A	0 to 60.00 A
	Accuracy:	–	±2.0% + 5LSD	–	±2.0% + 5LSD	±1.5% + 5LSD (0.00 to 20.00 A)  ±3.0% + 5LSD (>20.00 to 60.00 A)
Micro amps	Range:	–	–	0 to 2000 µA
	Accuracy:	–	–	±1.0% + 5LSD
Frequency	Range:	5.00 to 999.9 Hz
	Accuracy:	±1.0% + 5LSD (600 V range)
	Range:	50.0 to 400.0 Hz
	Accuracy:	±2.0% + 4LSD (600 A range)
Resistance	Range:	0.0 to 60.00 kΩ
	Accuracy:	±1.0% + 5LSD
Capacitance	Range:	0.0 to 2500 µF
	Accuracy:	±2.0% + 4LSD
Continuity beeper	ON ≤ 10 Ω
	Off > 250 Ω
Temperature*  (Type K thermocouple)		–	–	-40.0 to 752 °F -40.0 to 400 °C
		–	–	±1.0% + 3.0 °F (-40.0 to 14.0 °F)  ±1.0% + 1.5 °F (>40.0 to 99.9 °F)  ±1.0% + 2.0 °F (100 to 752 °F)  ±1.0% + 1.5 °C (-40.0 to 10.0 °C)  ±1.0% + 0.8 °C (>-10.0 to 99.9 °C)  ±1.0% + 1.0 °C (100 to 400 °C)
Non-contact voltage	10 V to 1000 V AC (50 to 60 Hz)
Phase rotation indication		–	–	Rotation-R for main supply  Rotation-M for motors
Diode test		•	•	•	•	•
Jaw opening		1.18 in (30 mm)	1.37 in (35 mm)	1.18 in (30 mm)	1.37 in (35 mm)	2.0 in (51 mm)
Safty rating		CAT III 600 V				CAT IV 600V  CAT III 1000 V
Special Features
In-rush current		–	•	•	•	•
Peak hold (Crest)		–	–	–	–	•
Relative zero		•	•	•	•	•
Max/Min/Avg		•	•	•	•	•
Data hold		•	•	•	•	•
Backlight		•	•	•	•	•
Auto power off		•	•	•	•	•
Work light		–	–	–	–	•